■
2-10
b) Axial length view screen
(1) Axial length measurement data display
Displays measurement conditions and measured axial length.
(2) Measurement data display
The axial length, anterior chamber depth, lens, and their average values are listed.
(3) "Delete/Restore" button
Deletes and recovers the measurement data.
(4) "Select" button
The measurement data at the cursor position is selected to be used for calculating IOL
power. The selected measurement data is indicated by an “*”.
(5) Selection cursor UP/DOWN buttons
(6) “Gate” button
(7) “Caliper” button
(8) “Dual” button
Displays the R/L alignment display screen.
(8)
(2)
(5)
(3)
(4)
(6) (7)
(1)
To Next Page
Loading...
