2-11
■
c) Corneal thickness measurement screen
(1) Real-time data display field
Displays the actual measurements of the loaded measurement points. The latest loaded
data are displayed during a measurement process.
(2) Corneal thickness data display
(3) Measurement data display
(4) "Delete/Restore" button
(5) “Caliper” button
(6) "Meas Point (measurement point)" button
(7) "Change Meas. Point" button
(8) Measurement waveform display field
(9) Measurement conditions display field
(10) ‘IOP’ button
(11) "Subtraction" button
(12) “Calibration” button
Calibrates the sensitivity of pachymetry probes.
(11)
(3)
(10)
(6)
(4)
(5)
(7)
(2)
(8)
(9)
(12)
(1)
To Next Page
Loading...
