Tomey OA-2000 - Page 77

3-45 ■
c) Caliper function
The caliper function is for temporary reference and cannot store the callipered data.
(Fig. 1)
1) Touch the "Caliper" button (1) to display the caliper screen (Fig. 2).
(Fig. 2)
2) Touch the “Switch” button (2) to select a caliper line to be adjusted. The active
caliper line is displayed in red and the other caliper line in yellow.
3) Touch the “active caliper line movement” button (3) to change the position of the
active caliper line. In conjunction with the movement of the caliper line, the
distance between the caliper lines (4) is displayed.
4) Touch the “Close” button (5) to close the caliper screen (Fig. 2) and return to the
previous screen (Fig. 1).
d) Subtraction display function
This function displays the difference value between the 2 selected measurement
data.
(Fig. 1)
(1)
(1)
(
2
)
(
3
)
(
5
)
(4)