Tomey TMS-5 - Page 139

3-89
● Offset
Check the “Offsets” check box (2) to set whether to
display or hide the alignment offset.
The offset (8) is displayed/hidden in the lower right of
the map.
● Invert Mapt
Check the “Invert Map” check box (3) to set whether to
turn the map upside down.
The map is displayed upside down (9). When the map
is displayed upside down, “INVERTED” (10) appears in
the upper right of the map.
(Fig. 3)
(8)
(Fig. 4)
(9)
(10)