3-2
3.1.2 Precautions for connecting the power cord
Check the frequency, voltage, and allowable current (or
power consumption) of the power source. Otherwise,
re or electric shock may occur.
Connect the power plug to a grounded 3-pin outlet.
Otherwise, a short circuit due to failure of the
instrument may result in electric shock.
Do not place any heavy object on the power cord or
squash the power cord. Fire or electric shock may
occur.
Fully insert the power plug into the outlet. Faulty
contact, allowing any metal to contact the exposed
terminals of the plug, or dust accumulated on the
exposed terminals of the plug may result in fire or
electric shock.
The power connector completely isolates the
instrument from the commercial power source. If there
is a problem with the instrument, turn off the power
switch and disconnect the power connector. Install the
instrument in a place where this can be performed
smoothly.
To Next Page
Loading...
Need help?
General
