Tomey TMS-5 - 3.3 Preparation for capturing

3-7
3.3 Preparation for capturing
3.3.1 Turning the power on

To cycle the power, turn the power off, wait for ten
seconds or so, and turn it on again.
1) Turn on the power switches of the isolation transformer
and personal computer to start Windows®.
2) Double-click “TOMEY Measurement” (1) on the
personal computer.
The log in screen (Fig. 2) appears.
3) Click the “OK” button to display the Examination List
screen (Fig. 3).
(1)
(Fig. 1)
(Fig. 2)
(Fig. 3)