5-7
5.6 Storing
Store the instrument in a location free of water or
chemicals. Any water or chemicals entering the
instrument may cause an electric shock or failure.
Do not store the instrument in a location where
chemicals are stored or gases may occur. Spilt
chemicals or vapor may enter the instrument and result
in re.
Do not hold the head, chin rest, forehead pad, joystick,
or cables when moving the main unit of the instrument.
These components are detachable and the instrument
may drop, resulting in injuries.
Disconnect the power cord from the outlet to ensure
safety when the instrument is not used for 1 month or
longer.
Store the instrument in a location not subject to direct
sunlight, high temperature and humidity, or air with
signicant dust, salt, and/or sulfur content. Otherwise,
failure or malfunction may occur.
Store the instrument in a leveled, stable location
free of vibration or mechanical impact. Otherwise,
measurement cannot be conducted correctly. The
instrument also may topple over or fall down, resulting
in re or a serious accident.
Place the dust cover over the main unit when not being
used. The measurement accuracy will deteriorate
significantly if the optical section in the instrument
becomes dirty.
Completely lower the head to the lower dead center when
storing the instrument.
Pressing the “PACKING” button (1) for 3 seconds
automatically returns the head to the lower dead center.
Turn power off.
(1)
(Fig. 1)
To Next Page
Loading...
Need help?
General
