Tomey TMS-5 - 3.5 Settings for main unit

3-21
3.5 Settings for main unit
3.5.1 Initial setup (Setup)
Set operation conditions on this screen.

After changing the settings, be sure to touch the “Save”
button to exit the screen. If the “Cancel” button is
touched, changes to the settings are not applied and
the previous setting remains effective.
Touch the “Setup” button (1) on the Capture screen to
display the Setup screen (Fig. 2). Touch one of the tabs
(2) listed on the left of the screen to select the setting
item and set conditions as needed on the corresponding
screen.
Touch the “Top” tab (3) after setting is complete to return
to the previous screen. Touch the “Save” button (4) to save
the new settings and return to the Capture screen (Fig.
1). Touching the “Cancel” button (5) returns you to the
Capture screen (Fig. 1) without changing any settings.
Common: Common items
Common 2: Common item 2
3D scan: Items related to slit mode 3D scan
2D scan: Items related to slit mode 2D scan
Information: Product information
(1)
(Fig. 1)
(3)
(4)
(2)
(5)
(Fig. 2)