Tomey TMS-5 - Page 72

3-22
a) Common Setup
Dene common settings on this screen.
Auto Power Off
Dene settings for the Auto Power Off function.
ON: Enables the Auto Power Off function.
OFF: Disables the Auto Power Off function.
Buzzer
Define settings for whether or not to activate the
buzzer.
ON: Activates the buzzer.
OFF: Deactivates the buzzer.
b) Common 2 Setup
Dene common settings on this screen.
Mode change assis
Enables or disables the mode change assist function
(automatically switches the mode when right and left is
changed in slit mode).
ON: Enables the mode change assist function.
OFF: Disables the mode change assist function.
Default AA (Default Alignment Assist)
Define the default setting of the Alignment Assist
function.
ON: The Alignment Assist function is enabled by
default.
OFF: The Alignment Assist function is disabled by
default.
c) 3D scan Setup
Define settings for capturing 3D images in slit mode on
this screen.
Default AS (default Auto Shot)
Dene the default setting of the Auto Shot function.
AS: Sets the default for the Auto Shot function to “AS
(Auto Shot).”
MS: Sets the default for the Auto Shot function to “MS
(Manual Shot).”
(Fig. 1)
(Fig. 1)
(Fig. 1)