3 -117
3.9 System Setup
The System Setup function allows you to set the clinic
information and map display methods. Click the “Save”
button to save changes to settings. Click the “Cancel”
button to clear all changes to settings. Click the “Default”
button to return settings to the defaults.
Setting items are divided into the following tabs according
to the setting properties.
● Common settings
● Map display settings
Single Map (Merged)
Single Map (Ring)
4Maps
6Maps
Fourier Map
Image
● Scale
● System
● Slide Making
● Custom Print tab
● IOL Screening
Settings in each tab are as described below.
● Common settings
Select the display settings commonly applied to all maps.
● Name OFF
Select whether to display (ON/OFF) the patient
name and ID.
To Next Page
Loading...
