Tomey TMS-5 - Utilities; Handling of Patient ID

3-99
3.8 Utilities
3.8.1 Handling of patient ID
a) Searching for patient
A patient can be searched for by ID or name.
1) Enter the patient ID or patient name and click the
“Search” button (1). Patient names that include the
entered characters are listed.
2) Select the desired patient from the list to display the
measurement data of the selected patient.
The patient name will be displayed according to the
method set by the character code (refer to “2.5.1
Examination List screen” ).
3) Also, pressing the Enter key searches for the patient.
In this case, the patient search will be conducted
according to the method set in Patient Search (refer to
“2.5.1 Examination List screen” ).
(Fig. 1)
(2)
(1)