Tomey TMS-5 - Page 58

3-8
4) Turn on the power switch (2) of the main unit.
The title screen (Fig. 5) appears and then the
measurement screen (Fig. 6) appears on the display
of the main unit. The message “Move the joystick
backward” appears on the screen to initialize the
internal motor etc. when starting the main unit. Operate
the joystick to move the main unit toward the physician
(Fig. 7). The initialization process automatically starts
when the main unit reaches the point farthest from the
patient. The ring topo mode screen (Fig. 8) appears
when initialization is completed.

Because the capture mode may change while the
instrument is initialized, pay attention to prevent any
moving parts from hitting the patient’s eye or nose.
Also, make sure that the patient does not place their
hands or fingers near any moving section of the
instrument. Doing so may cause injury.
10
1((
(2)
(Fig. 4)
XGT
(Fig. 5)
Checker side
(Fig. 7)
(Fig. 6)
(Fig. 8)
(2)