3-93
a) Dual Map
Dual Map displays two maps side by side on the same
screen.
The scale is common to both maps, but the measurement
data and display options are shown for each map
separately.
Click the map type (1), scale name (2), and unit (3)
displayed in light blue to change properties.
Similarly to the single map, when either map is clicked, the
information at the corresponding cursor position on both
maps (refractive power, radius of corneal curvature, and
distance from the analysis center to meridian) is displayed.
b) Multiple Map
Up to four maps can be displayed at the same time on the
Multiple Map screen.
(1)
(2)
(3)
(Fig. 1)
(1)
(2)
(3)
(Fig. 1)
To Next Page
Loading...
