Tomey TMS-5 - Page 156

3-106
The following requirements apply to each item.
Merged : Merged data
Ring : Ring data
ANTE : Cornea anterior data
POS : Cornea posterior data
REAL : Cornea anterior/posterior data
Data for each item is at the radius (or ring) position.For
example, a graph showing changes in values from the
center to the periphery at a specic angle can be created
by assigning a radius to the X axis and object data to
the Y axis.Details of output for Pupil and Mean (Dio/
Dia) are different.The distance from the map center to
the pupil outline in 256 directions (1 x 256 data sets in
total) is output for Pupil.Because Mean (Dio/Dia) shows
the average of each ring, data sets for every 25 rings are
output for Dio and Dia (2 x 25 data sets in total).
Various parameters for each examination data are output
into one Index data le.Data output may not be possible
for some parameter types.
6) Select the data to be output and click the “Create
Tables” button (5). (Fig. 3)
7) The Browse for Folder screen appears to select the
folder for saving the output le.
8) Select the folder to save the output le and click the “OK”
button (6). (Fig. 5)
9) Data is saved to a le in the specied folder.
10) To change the data file name, click the “Settings”
button (7) on the Bucket (Data Tables). The Setting
screen for data le name appears (Fig. 6).
(Fig. 5)