2-9
(5) “Setup” button
Displays the setting screen.
(6) “Mode” button
Switches the capture mode.
Ring topo mode / Slit mode
(7) “Temp” button
Displays the temporary setting screen. Set specic conditions for the current process only.
(8) Alignment mark
Align the center of the patient's eye with this position.
(9) Captured data display
Displays the number of images to be captured. Refer to “3.5 Various settings of main unit” for
how to change the number of images.
(10) “AS” (Auto Shot) button
Switches automatic measurement and manual measurement. Set specic conditions for the
current process only.
(11) “AA” button
Turns the alignment assist function on and off. Set specic conditions for the current process
only.
To Next Page
Loading...
