2-23
(3) “Utility” button
● System Setup
Performs various settings. (Refer to “3.9 System Setup.”)
(4) “Save” button
Captures the displayed Analysis screen and saves it in JPEG or BMP format.
(5) “Print preview” button
Displays a print preview.
(6) “Print” button
Prints the displayed screen.
(7) “Custom print” button
Performs custom printing.(Refer to “3.7 Output of results.”)
(8) “Transmissivity setting” button
Sets the transmissivity of the map. 5 levels of transmissivity between the range 0% and 100%
are shown in increments of 25%.
(9) Analysis screen switch tab
Switches the Analysis screen.
MERGED TOPO Viewer: Thumbnail
Image
Single Map
4Maps
6Maps
Fourier Map
Merged Calculation
Slit Calculation
Ectasia Screening
IOL Screening
RING TOPO Viewer: Single Map
Fourier Map
Klyce Corneal Statistics
Keratoconus Screening
Ring Calculation
(10) “Viewer change” button
Switches between MERGED TOPO viewer and RING TOPO viewer.
To Next Page
Loading...
