Tomey TMS-5 - Page 67

3-17
6) Double-click an image after capturing is completed
in both ring topo mode and slit mode, and the Exam
(MERGED) screen (Fig. 4) opens.
7) When capturing is conducted in slit mode again for
the same patient, click the “Cancel” button (6) on
the Exam (MERGED) screen (Fig. 4) to return to the
Capture screen (Fig. 5). Right-click an image captured
in slit mode to open the Map Options Menu (Fig. 6).
Check the “Clear” check box on the menu and click
“Apply to this map.”(The captured slit image is deleted.)
Press the joystick button (5) of the main unit to start
capturing again.
(6)
(Fig. 4)
(Fig. 5)
(Fig. 6)