3-27
The 4Maps (Fig. 3) is shown immediately after the analysis
screen appears.
Click an analysis screen switch tab (3) or the View menu (4)
to change the Analysis screen.
● Thumbnail
● Image
● Single Map
● 4Maps
● 6Maps
● Fourier Map
● Merged Calculation
● Slit Calculation
● Ectasia Screening
● IOL Screening
Click the transmissivity setting button (5) to change
the transmissivity of the map. 5 levels of transmissivity
between the range 0% and 100% are shown in increments
of 25%.
Click the “viewer change” button to switch between
MERGED TOPO viewer and RING TOPO viewer.
Open the File menu (7) and select “Close,” or click the
close button in the upper right corner of the screen to
exit the analysis screen and return to the Capture or
Examination List screen.
To Next Page
Loading...
