Tomey ViewLight EM-4000 User Manual

3-21䢢 䕔 
Analysis in the dark area can be set to ON or OFF in the item “Dark Area
Analysis” on the System Setup screen.
- The initial setting is “ON.”
- The “Dark Area” button does not appear on the single eye analysis
screen if this item is set to OFF. Namely, the dark area analysis
screen (Fig. 3) cannot be called.
- Refer to “3.7.3 Application" for setting method.
㻌
b) Editing trace line
Trace lines of endothelium tissues extracted by automatic analysis can be
edited.
Edit marks appear on the analysis screen when the trace line is edited. Refer
to “2.4.4 Analysis screen” for details of edit marks.
Touch the “Trace Edit” button (1) on the analysis screen (Fig. 1) to open the
Trace Edit screen (Fig. 2).
(Fig. 1)
(Fig. 2)
(2) Pencil button
Adds trace lines shown in red. Straight lines or curves are drawn as
traced on the image.
(Fig. 3)
(1)
(2)
(11)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(12)

Tomey ViewLight EM-4000 Specifications

General

Brand	Tomey
Model	ViewLight EM-4000
Category	Microscope
Language	English