9-2
9 MEMORY MANAGER MODE
9.1 Display Internal Memory Status
This mode is used to check the internal memory status.
Operating procedure Operation Display
1
Press the [F3](MEMORY MGR. ) key from the
menu 1/3.
[F3]
2
Press the [F1](FILE STATUS) key.
The total number of stored measured data files
and coordinate l files are shown.
[F1]
Remaining memory capacity
3
Press the [F4](P
↓
) key.
The total number of stored measured data and
coordinate data in all files are shown.*1)
[F4]
*1) Each coordinate file has one extra data for working area.
● The FILE/DATA STATUS display will change alternately by pressing [F4]( P
↓
) key.
● To return to MEMORY MGR. menu press the [ESC] key.
MEMORY MGR. 1/3
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN P
↓
FILE STATUS 1/2
MEAS. FILE : 3
COORD. FILE: 6
[...........] P
↓
DATA STATUS 2/2
MEAS. DATA :0100
COORD. DATA:0050
[...........] P
↓
To Next Page
Loading...
