Topcon GPT-3000W Series User Manual

9-4
9 MEMORY MANAGER MODE
● To edit the data in searching mode
Point name (PT#, BS#) , ID, PCODE and Height data (INS.HT, R.HT) can be corrected in the searching
mode.
Measured value can not be corrected.
Operating procedure Operation Display
1
Press the [F1](EDIT) key from last page of
displayed data.
[F1]
2
Select the item to correct by pressing [ ]or[ ]
key.
[]or[]
3
Press the [F1](INPUT) key and enter data. *1)
Press the [F4](ENT) key.
4
Press the [F4](ENTER) key.
[F1]
Enter Data
[F4]
[F4]
5
Press the [F3](YES) key .
[F3]
*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.
● When editing, ID and PCODE are not linked with PCODE LIBRARY.
● Even though the height data (INS.HT, R.HT) are corrected, the measured value can not be corrected.
PT#

TOP-104 2/2
PCODE

R.HT

1.000 m
EDIT
↓
PT#
→
TOP-104
PCODE :
R.HT : 1.000 m
INPUT ––– ––– ENTER
PT# :TOP-104
PCODE :
R.HT
→
1.000 m
INPUT ––– ––– ENTER
PT#
→
TOP-104
PCODE :
R.HT : 1.200 m
>SAVE? [YES][NO]
PT#

TOP-104 2/2
PCODE

R.HT

1.200 m
EDIT

Topcon GPT-3000W Series Specifications

General

Brand	Topcon
Model	GPT-3000W Series
Category	Measuring Instruments
Language	English