172
FOREWORD 1
General Handling Precautions 2
Display for Safe Use 3
Safety Cautions 3
User 4
Exceptions from Responsibility 4
Laser Safety 5
Labels 5
Symbol mark while the laser is emitting. 5
Standard Set Composition 9
NOMENCLATURE AND FUNCTIONS 1
Nomenclature 1
Display 3
Operating Key 4
Function Key (Soft Key) 5
Star key mode 7
Serial signal RS-232C connector 10
Bluetooth™ communication 10
Laser Plummet ON/OFF (Only for Laser Plummet type) 11
PREPARATION FOR MEASUREMENT 1
Power Connection 1
Setting Instrument Up For Measurement 2
Power Switch Key ON 3
Battery Power Remaining Display 4
Vertical and Horizontal Angle Tilt Correction 5
How to Enter Alphanumeric characters 7
ANGLE MEASUREMENT 1
Measuring Horizontal Angle Right and Vertical Angle 1
Switching Horizontal Angle Right/Left 2
Measuring from the Required Horizontal Angle 2
Setting by Holding the Angle 2
Setting a Horizontal Angle from the Keys 3
Vertical Angle Percent Grade(%) Mode 3
Repetition Angle Measurement 4
Buzzer Sounding for Horizontal Angle 90° Increments 5
Compasses ( vertical angle) 6
DISTANCE MEASUREMENT 1
Setting of the Atmospheric Correction 1
Setting of the Correction for Prism Constant / Non-prism Constant 1
Distance Measurement (Continuous Measurement) 2
Distance Measurement (N-time Measurement/Single Measurement) 3
Fine Mode/Tracking Mode/Coarse Mode 4
Stake Out (S.O) 5
Offset Measurement 6
Angle Offset 7
Distance Offset Measurement 9
To Next Page
Loading...
