About the OAF
27
P/N: 1004636-01
Configuring the Receiver
Topcon’s TRU initially checks to see if the selected file is compatible with the currently connected receiver. If
you chose a file not intended for this receiver, the Upload OAF window displays an error icon next to the
Receiver ID and disables the Upload the File to the Receiver button.
5. Click Upload the File to the Receiver to start loading the file (Figure 23).
Figure 23: Upload the OAF to the Receiver
6. Click Yes at the prompt to reset the receiver (Figure 24).
Figure 24: Reset Receiver
When the receiver resets, the Connection Parameters window opens.
To Next Page
Loading...
Need help?
General
