Topcon PS Series User Manual

20. CHANGING THE SETTINGS
136
[OK] : Terminate setting out measurement for the selected setting out point
and return to <Key in coord>. This setting out point will be removed
from the list (can only be allocated to 3 above).
PROCEDURE Allocating a softkey
1. Select "Customize" to display <Customize/Select
screen>.
Select the measurement mode in which you want
to allocate a softkey.
Select "Softkey".
2. Select the desired tab. All softkeys currently
allocated to each page of that tab are displayed.

Topcon PS Series Specifications

General

Brand	Topcon
Model	PS Series
Category	Measuring Instruments
Language	English