EasyManuals Logo

Topcon PS Series User Manual

Topcon PS Series
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
26. SPECIFICATIONS
164
Atmospheric correction
Temperature input range: - 30 to 60°C (in 0.1°C step)/ - 22 to 140°F (in 1°F step)
Pressure input range: 500 to 1,400 hPa (in 1hPa step)
375 to 1,050 mmHg (in 1mmHg step)
14.8 to 41.3 inchHg (in 0.1inchHg step)
ppm input range: -499 to 499 ppm (in 1 ppm step)
Prism constant correction -99 to 99 mm (in 1 mm step)
0mm fixed for reflectorless measurement
Earth curvature and refraction correction
No/Yes K=0.142/Yes K=0.20 (selectable)
Sea level correction No/Yes (selectable)
*1 : Slight haze, visibility about 20 km, sunny periods, weak scintillation.
*2 : No haze, visibility about 40 km, overcast, no scintillation.
*3 : Figures when both the elevation and depression angles of the laser beam are within 15° and
the instrument is facing the 360° Prism.
*4 : Figures when the laser beam strikes within 30° of the reflective sheet target.
*5 : Figures when using Kodak Gray Card White side (reflection factor 90%) and brightness level
is less than 5,000 lx.
*6 : Figures when using Kodak Gray Card White side (reflection factor 90%) and brightness level
is less than 500 lx.
*7 : Face the target toward the prism during the measurement with the distance at 10 m or less.
*8 : Accuracy is (5 + 2 ppm X D) mm for distance range 0.3 to 0.66m.
*9 : Figures will change depending on the target reflection factor, weather conditions and location
conditions.
Auto Tracking (Auto Tracking model only)
Measuring method Pulse laser transmitter and image detector with co-axial optics
Signal source (emitted beam) infrared laser diode (980nm)
Class 1
(IEC60825-1 Ed. 2.0: 2007/FDA CDRH 21 CFR Part 1040.10 and
1040.11 (Complies with FDA performance standards for laser
products except for deviations pursuant to Laser Notice No.50, dated
June 24, 2007.))
Viewing angle ± 45’
Measuring range V: Elevation angle 90° (when handle is attached: 70°) ,
Depression angle 41°
*10
Maximum Auto Tracking measurement range
*11
360° Prism ATP1/ATP1S: 2 to 600 m (1,960 ft)
*3
Prism-5
: 1.3 to 600 m (1,960 ft)
Prism-
2: 1.3 to 1,000 m (3,280 ft)
Auto Tracking speed
*11
20°/sec (Prism moving at 5m/sec. at 20m distance)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Topcon PS Series and is the answer not in the manual?

Topcon PS Series Specifications

General IconGeneral
BrandTopcon
ModelPS Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals