43
9. CONNECTING TO EXTERNAL DEVICES
& Terminate
Select the option Off or On for carrige return (CR) and line feed when collecting measurement
data with a computer.
& ACK mode
When communicating to an external device, the protocol for handshaking can omit the [ACK]
coming from the external device so data is not sent again.
On : Standard
Off : Omit the [ACK]
$
• Setting’ (5) and (7) are for an instrument using
GTS commands.
2. Select a mode for the PS in the "Bluetooth" tab.
The factory setting is "Slave".
Register companion devices.
• "Master" cannot be selected when no
companion devices have been registered.
C "Master"/"Slave": "& Bluetooth
connections"
3. Select, in "Link", a companion device from among
the Bluetooth devices already registered in the
instrument.
C Registering devices: "PROCEDURE
Registering Bluetooth companion devices"
• Companion devices cannot be selected when
the PS is set as "Slave".
4. Set "Authentication" to "Yes" or "No".
If "Authentication" is set to "Yes" for the PS the
passkey will also need to be input on the
companion device.
To Next Page
Loading...
