19
ASSEMBLY PROCEDURE
2
Loosen the fixing screw on the outside of the fitting cavity of the illumination unit with a
screwdriver. Align indices and slowly lower the illumination unit onto the shaft of the base
unit.
3
Firmly tighten the fixing screw with a screwdriver.
REMO
VING THE ILLUMINATION UNIT PAD
1
Remove the rubber band and slowly withdraw the protection pad from the slit operation
mechanism of the illumination unit.
While assembling the illumination unit, take care not to get your fingers caught.
Indices
Protection pad (for transportation)
To Next Page
Loading...
