52
MAINTENANCE AND CHECKUPS
CLEANING THE SLIDING PLATE, RAIL AND WHEEL SHAFT
1 Move the base right and left and wipe the wheel shaft clean with a dry cloth.
2 Hold up the control lever and clean the sliding plate with a dry cloth.
DISPOSAL OF THE PRODUCT
• For disposal of the instrument and consumables, contact a waste disposer or call your
dealer or TOPCON (see the back cover).
NOTICE
When stained, the movement of the sliding plate and rail of the
tabletop and the wheel shaft of the base becomes less
smooth. Clean them with a dry cloth.
CAUTION
The base contains strong springs. Do not attempt to disassem-
ble or burn the base, as the springs could cause injury by
shooting out of it.
Rail
Wheel shaft
Sliding plate
Control lever
To Next Page
Loading...
Need help?
General
