39
SPECIFICATIONS AND PERFORMANCE
ELECTROMAGNETIC COMPATIBILITY
This product conforms to the EMC Standard(IEC 60601-1-2:2001).
a MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and
needs to be installed and put into service according to the EMC information provided in the
ACCOMPANYING DOCUMENTS.
b Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL
EQUIPMENT.
c The use of ACCESSORIES, transducers and cables other than those specified, with the
exception of transducers and cables sold by the manufacturer of the EQUIPMENT or SYS-
TEM as replacement parts for internal components, may result in increased EMISSIONS or
decreased IMMUNITY of the EQUIPMENT or SYSTEM.
d The EQUIPMENT or SYSTEM should not be used adjacent to or stacked with other equip-
ment. IF adjacent or stacked use is necessary, the EQUIPMENT or SYSTEM should be
observed to verify normal operation in the configuration in which it will be used.
e The use of the ACCESSORY, transducer or cable with EQUIPMENT and SYSTEMS other
than those specified may result in increased EMISSION or decreased IMMUNITY of the
EQUIPMENT or SYSTEM.
Item Article code Model No. Length(m)
Flash Device FD-21 447909756 - -
Digital Camera Unit DC-1 D2 447939711 - -
Background illumination BG-2GN 446949680 - -
Slit Lamp trigger cable
447907100
447907200
- 0.9
4.0
IF cable 447938450 - 2.0
USB cable 447938877 - 3.0
Video cable 447938550 - 3.0
Guidance and manufacturer's declaration - electromagnetic emissions
The SL-D7/SL-D8Z is intended for use in the electromagnetic environment specified below. The
customer or the user of the SL-D7/SL-D8Z should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The SL-D7/SL-D8Z uses RF energy only for its inter-
nal function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class A
The SL-D7/SL-D8Z is suitable for use in all establish-
ments other than domestic and those directly
connected to the public low-voltage power supply net-
work that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC61000-3-3
Complies
To Next Page
Loading...
Need help?
General
