Icons Prevention item Page
To prevent falling during use and movement, secure each unit.
To avoid injury to the eye and nose whilst moving the base unit,
make sure that you have a clear view of the slit lamp and the
patient's face.
For the safety of the operator and the patient, do not place fingers
between moving parts.
To avoid injury to the patient’s head, incline the illumination unit
holding the base unit.
To avoid causing discomfort to the patient or any damage to the
patient's eye, keep the illumination at its minimum during adjust-
ment.
To avoid electric shocks, do not attempt overhauling, rebuilding or
repairs. Ask your dealer for repair.
When replacing the lamp, switch off the power supply and remove
the power cable to avoid electric shocks.
Beware of high temperatures when replacing the lamp immediately
after switching it off: these could cause burns.
When replacing fuses, first switch off the power supply and remove
the power cable to avoid electric shocks.
Before carrying out daily care, remove the power cable (to avoid
electric shocks) and wait until the lamp house has cooled (to avoid
burns).
Do not touch parts inside the lamp house cover during operation
and immediately after switching off the power supply: this could
cause burns.
The base contains strong springs. Do not attempt to disassemble
or burn the base, as the springs could cause injury by shooting out
of it.
To prevent falling during use and movement, secure optional acces-
sories.
To Next Page
Loading...
Need help?
General
