Phoenix Pro User Manual
130
the vehicle or in system settings.
1. Turn the ignition on.
2. Plug the VCI directly (or use the OBD-II extension cable) into the vehicle’s
DLC.
3. On the home screen, tap
Setting -> Bluetooth
.
4. Set Bluetooth "ON". Phoenix Pro will search for all the available Bluetooth
devices automatically.
5. Tap the name of the VCI (98********00, where ******** stands for 8 digits) to
start pairing. Input the Bluetooth request code (default value: 0000 or 1234) if
necessary. Once the pairing is properly done, the system will display it as a
paired device.
9. How to retrieve the login password?
Please follow below steps to proceed in case you forgot the login password:
1. Tap the application icon on the home screen to run it.
2. Tap [Login] button on the upper right corner of the screen.
3. Tap "Retrieve password".
4. Input product S/N and follow the on-screen prompts to retrieve the password.
To Next Page
Loading...
