Phoenix Pro User Manual
20
covers.
Repair Info
Provides a large number of models of free maintenance
information for free reference.
Product Manual
Built-in product manual for users to check at any time.
Oscilloscope
To determine vehicle electrical equipment and circuit
trouble. See Chapter 12.
Sensor Simulator
To diagnose/simulate vehicle ECU sensor trouble. See
Chapter 9.
Multimeter
To measure physical parameters such as voltage,
resistance, frequency etc. See Chapter 10.
Battery Tester
To test whether vehicle's battery is good or not. See
Chapter 11.
Videoscope
To check unseen or unreachable parts or components.
Ignition Scope
To test and analyze of secondary signals of various
ignition systems of the engine. See Chapter 13.
Camera
To open the camera.
FAQ
Summarizes some frequently asked problems and
specific troubleshooting solutions when operating the
product.
4.2.3 Vehicle menu layout
After downloading the diagnostic software, go to “Local Diagnostics” to check if
all software is completely downloaded and installed.
Tap “Local Diagnostics”, a screen similar to the following figure appears:
To Next Page
Loading...
