Toro 34215 - Spraying with the Sprayer Boom

SprayingwiththeSprayerBoom
Important:Inordertoensurethatyourchemical
solutionremainswellmixed,usetheagitationfeature
wheneveryouhavesolutioninthetank.Fortheagitation
featuretowork,setthesprayer-pumpswitchtotheON
position,pullbackthetank-agitationlever,andrunthe
engineathighidle.Ifyoushutoffthemachineand
agitationisneeded,leavethemotion-controlleverinthe
NEUTRALposition,settheparkingbrake,increasethe
throttletotheFASTposition,switchonthepumpandset
agitationlever.
Note:Movethetank-agitationleverforwardbeforespraying
toensurepropersprayer-pumppressure.Thereissome
agitationeffectevenwhilethetank-agitationleverisinthe
OFFposition.
Note:Ensurethatthesprayeriscalibratedbeforestarting
sprayapplication
1.Setthesprayer-pumpswitchisintheONposition.
2.Drivetotheworksitewhereyouwillspray.
3.Pushforwardthetank-agitationlevertotheOFF
position.
4.Rotatethesprayer-pressurecontroltothesettingthat
youdeterminedinCalibratingtheSprayer(page35).
5.Movethenarroworwide-spraypatternlevertotheON
positionandbeginspraying.
Important:Donotuseboththenarrowandwide
controlsatthesametime.
Figure50
Narrow-spraypattern
1.Overlaparea2.Effectivesprayarea
Figure51
Wide-spraypattern
1.Overlaparea2.Effectivesprayarea
6.Whennishedspraying,performthefollowing:
A.Pushforwardthespray-patternlever.
B.Setthesprayer-pumpswitchisintheOFF
position.
Note:Ifyouneedtocontinuetomixthesprayer
tankcontents,leavethesprayer-pumpswitchand
thetank-agitationleverintheONpositionfor
sprayer-tankagitation.
43