Toro 34215 - Spraying Tips

SprayingTips
Figure52
1.Overlaparea—narrowspraypattern6.SprayerOff—donotspraywhenturningthemachine180°
2.Effectivesprayarea7.Endofsprayingjob
3.Forward
8.Propertyfence
4.Overlaparea—widespraypattern9.Gate
5.2.4m(8ft)
•Donotoverlaptheeffectivesprayareathatyouhave
previouslysprayed(seeFigure52).
•Watchforpluggedsprayernozzles.
•Movethenarrow-andwide-spraypatternleverstothe
OFFpositiontostopthesprayowbeforestopping
themotionofthemachine.Oncestopped,leave
themotion-controlleverinNEUTRALandleavethe
sprayer-pumpswitchintheONposition..
•Youwillobtainbetterresultsifthemachineismoving
whenspraycontrolsareturnedON.
•Toensureadequatepumppressureforproperspray
distribution,pushforwardthetank-agitationlever.
•Watchforchangesintheapplicationrate.Changesin
theapplicationrateindicatethatyourgroundspeedhas
changedbeyondtheoperatingrangeofthenozzlesor
thereisaproblemwiththesprayersystem.
Note:Whenthetankisnearlyempty,thetankagitation
maycausefoamingofthechemicalsolutioninthetank.In
thiscase,pushforwardthetankagitationlevertotheOff
position.Alternatively,ananti-foamingagentcanbeusedin
thetank(ifcompatiblewiththeexistingchemical).
44