Toro ProCore 648s - Installing Turf Guards, Tine Holders, and Tines

Note:Donottightentheangelocknuts.
g357675
Figure38
1.Washer(7/16x13/16inch)4.Turfguard
2.Flangelocknut(3/8inch)5.Stud(turf-guardbracket)
3.Turfguardclamp
AssemblingtheTineHolder
1.Looselyassemblethetineclamptothetine
holder(Figure39)with4bolts(3/8x1-1/2
inches).Donottightenthebolts.
Note:Theboltsarepartsinthetineholderkits.
g356449
Figure39
1.Tineholder
3.Bolt(3/8x1-1/2inches)
2.Tineclamp
2.Assemblethetinesintothetineholderandtine
clamp(Figure40).
g356451
Figure40
1.Tine
2.Bolt(3/8x1-1/2inches)
3.Torquethebolts(3/8x1-1/2inches)securing
thetineclampsandtinesto40.6N∙m(30ft-lb).
4.Repeatsteps1through3fortheothertine
clamps,tineholders,andtines.
AssemblingtheTinestothe
CoringHead
1.Looselyassembletineholderandtinestotine
arm#2(Figure41andFigure42)with3bolts
(1/2x1-1/4inches).
g357676
Figure41
1.Number5tineholder2.Number2tineholder
30