Toro ProCore 648s - Driving the Machine in the Transport Mode

5.Todisengagethespeedlockoperation,perform
oneofthefollowing:
•Pressthespeed-lockswitchtotheOFF
position.
•Rotatethetopofthetractioncontrolrearward
todrivethemachinebackward.
•Releasetheoperatorpresencebail.
•Pressthebump-stopswitch.
UsingtheGround-SpeedLock
AerateMode
Note:Theground-speedlockisnotavailablewhen
aeratingintheimmediate-dropmode.
1.Pressthetransport/aerateswitchisinthe
AERATEposition(Figure81).
g358598
Figure81
1.Speed-lockswitch5.Operatorpresencebail
2.ONposition(speed-lock
switch)
6.Aeratebail
3.OFFposition(speed-lock
switch)
7.Tractioncontrol
4.Transport/aerationswitch
(AERATEposition)
8.Bump-stopswitch
2.Pressthespeed-lockswitchtotheONposition.
3.Drivethemachineforwardandclosetheaerate
bail.
Note:Theground-speedlockengages,andthe
coringheadlowers.
4.Attheendoftheaerationpass,releasethe
aeratebail.
Note:Thecoringheadraises,butthemachine
maintainsgroundspeedattheaerationhole
spacingrate.
5.Todisengagethespeedlockoperation,perform
oneofthefollowing:
•Pressthespeed-lockswitchtotheOFF
position.
•Rotatethetopofthetractioncontrolrearward
todrivethemachinebackward.
•Releasetheoperatorpresencebail.
•Pressthebump-stopswitch.
DrivingtheMachineinthe
TransportMode
Note:Usethetransportmodewhenyoumovethe
machinebetweenjobsites.
Note:Themachinedrivesatareducedvariable
speedanytimethetransport/aerationswitchisinthe
AERATIONposition.
1.Starttheengine,andmovethethrottlecontrol
totheFASTposition;refertoStartingtheEngine
(page40).
2.Lowerthehandlebartoreleasetheparking
brake;refertoReleasingtheParkingBrake
(page39).
3.Presstheleftsideofthetransport/aeration
switchtotheTRANSPORTposition(Figure82).
g339584
Figure82
1.Transport/aerationswitch
(TRANSPORTposition)
3.Tractioncontrol
2.Operator-presencebail
Note:TheInfoCenterdisplaystheTRANSPORT
icon(Figure83).
42