Toro ProCore 648s - Driving the Machine in the Reverse Direction; Resetting the Bump-Stop Switch

g342253
Figure93
1.Aeratebail
RaisingtheCoringHead
Immediate-DropMode
Toraisethecorehead,perform1ofthefollowing:
•Releasetheaeratebail(Figure94).
Note:Themachineliftsthecoringhead
immediately.
g342257
Figure94
1.Aeratebail
•Drivethemachineinthereversedirection;refer
toDrivingtheMachineintheReverseDirection
(page46).
DrivingtheMachineintheReverse
Direction
1.Ifyouloweredthecoringhead,releasethe
aeratebail(Figure95).
g342258
Figure95
1.Aeratebail2.Tractioncontrol
2.Releasethetractioncontrolandallowittomove
totheNEUTRALposition.
3.Whileholdingtheoperator-presencebailtothe
handlebar,slowlyrotatethetopofthetraction
controlrearward(Figure96).
g342259
Figure96
1.Tractioncontrol
ResettingtheBump-StopSwitch
1.Releasethetractioncontrolandallowitto
movetotheNEUTRALposition,andreleasethe
operator-presencebail(Figure97).
g342261
Figure97
1.Operator-presencebail
2.Tractioncontrol
46