Toro ProCore 648s - Accessing the Area and Volume Counters

Important:Ifthetinediameterand/orthe
tinequantityvalue(s)areincorrectbefore
aeratingthesite,theInfoCenterwillcalculate
anddisplayincorrectcorevolumevaluesfor
Area1andArea2.Ifthediameterand/or
quantityvaluesarechangedafteraerating,the
InfoCenterwillchangethedisplayedvolume
values.
AccessingtheAreaandVolume
Counters
1.Parkthemachineonalevelsurface.
Note:Thehandlebarremainloweredsothat
youcanviewtheInfoCenter.
2.Ensurethattheengineisrunningortheignition
keyintheRUNposition.
3.IntheInfoCenter,navigatetotheMAINMENU
(Figure102).
g372501
Figure102
4.PressthecenterInfoCenterbuttonuntilthe
SERVICEoptionisselected,andpresstheright
button.
5.IntheSERVICEscreen,pressthecenter
InfoCenterbuttonuntiltheSTATISTICSoptionis
selected,andpresstherightbutton(Figure103).
g372503
Figure103
Note:AnAREAcounterdisplaysinthe
STATISTICSscreen.
g372507
Figure104
UsingtheArea1—Areaand
VolumeCounters
MachineOperator
1.IntheSTATISTICSscreen,pressthecenter
InfoCenterbuttonuntiltheAREA1optionis
selected(Figure105).
g372504
Figure105
48