Control Panel Removal (continued)
g421542
Figure 132
7. Disconnect the wire harness from the hourmeter .
g421541
Figure 133
8. Disconnect the wire harness from the USB power port.
g421559
Figure 134
9. Using a 1/4 inch socket, remove the 2 (#8) bolts securing the throttle and
choke cables to the engine.
10. Unhook the throttle and choke cables at the carburetor linkage.
2000 Series Z MASTER®Service Manual Page 8–1 1 Electrical: Service and Repairs
3460-328 Rev A
To Next Page
Loading...
