Spindle Installation (continued)
g422372
Figure 56
g429399
Figure 57
3. Install the blades. Using a 1-1/2 and 15/16 inch wrench, hold the spindle
shaft and install the (5/8 inch) bolt to secure the blade to the spindle shaft.
T orque to 142 ± 7 N•m (105 ± 5 ft-lb).
4. Install the deck belt. Refer to Deck Belt Installation ( page 5– 9 ) .
5. Connect the battery by installing the positive cable rst, then the negative
cable to the battery .
Deck: Service and Repairs Page 5–16 2000 Series Z MASTER®Service Manual
3460-328 Rev A
To Next Page
Loading...
