Seat Removal (continued)
g42041 1
Figure 74
4. Lift the seat forward and disconnect the seat pressure switch from the wire
harness. T ilt the seat back into position.
5. Using a 1/2 inch socket and wrench, remove the 2 (5/16 inch) nuts and
shoulder bolts securing the front of the seat to the chassis. Remove the
seat assembly .
g421557
Figure 75
6. Using a 1/2 inch socket, remove the 4 (5/16 inch) nuts securing the seat
assembly to the seat pan.
2000 Series Z MASTER®Service Manual Page 6–15 Chassis: Service and Repairs
3460-328 Rev A
To Next Page
Loading...
