Parking Brake Assembly Removal (continued)
g421533
Figure 95
Parking Brake Assembly Installation
1. Lower the park brake shaft into position and slide it into the LH bushing.
2. Using a 1/2 inch socket, install the 2 (5/16 inch) nuts and carriage bolts to
secure the park brake shaft to the chassis.
g421532
Figure 96
3. Connect the extension spring to the chassis.
4. Install the wire harness to the parking brake safety switch.
2000 Series Z MASTER®Service Manual Page 6–27 Chassis: Service and Repairs
3460-328 Rev A
To Next Page
Loading...
