Trunks
309 Direct Inward Dialing
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03 6-15
Trunks
15 VM Dial Enter the VM mail box number which should answer calls for this DID/DNIS number.
Possible values: Digits 0~9,
and #. For a pause enter Px, where x=0~9 (seconds),
up to 10 characters (default = no value).
This mail box number will be sent to voice mail on a DID/DNIS call that rings directly to
voice mail; and, on a direct DID/DNIS call to a DN that forwards to voice mail before it is
answered by the DN.
If a DID/DNIS call is answered by a station and then transferred to a DN that forwards
to voice mail, this mail box number of the DID/DNIS number or the forwarding DN’s mail
box number will be sent to voice mail per Program 579, 01.
If this VMID code is not set, direct DID/DNIS calls will go to the VM general greeting
and DID/DNIS calls that forward from a DN to VM will go to the DN’s VMID mail box.
This voice mail box number is sent to the VM port, as DTMF digits, after the VM port
answers a DID/DNIS call as explained above. These digits are sent to the VM port if the
CTX is set for SMDI or DTMF integration in Program 580, 01.
16 Tenant Number Enter the Tenant number to which this DID number should be assigned.
Possible values: 1~8.
FIELD DESCRIPTION
To Next Page
Loading...
