Services
540 Pilot DN Assignment
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03 9-3
Services
FIELD DESCRIPTION
01 DID/DNIS VMID
Option
Select DN VMID to send the DN’s VMID to voice mail on DID/DNIS calls that are
answered and then transferred to a DN which then forwards to voice mail.
Select DID/DNIS VMID to send the DID/DNIS number’s VMID to voice mail on
DID/DNIS calls that are answered and then transferred to a DN which then
forwards to voice mail.
Possible values: DN VMID (default), DID/DNIS VMID.
If a DID/DNIS call is answered by a station and then transferred to a DN which
then forwards to voice mail, the VMID of the DID/DNIS number (Program 309,
)%
or
)%
) or the VMID of the forwarding DN (Program 200,
)%
or 206,
)%
) will be sent to voice mail per this option.
Note The DID/DNIS number’s VMID (Program. 309,
)%
or
)%
) is always
sent to voice mail on DID/DNIS calls that ring directly to voice mail or ring
a DN which then forwards to voice mail before it is ever answered.
02 Cancellation Method
for VM MW
Select the method used to cancel Voice Mail message waiting indication.
Possible values: Auto and Access Code Cancel or Access Code Cancel
(default)
03 Message Desk
Number
Enable to send the SMDI Message Desk Number (001) in the SMDI packet;
otherwise, 000 for a station call or the 3-digit CO line number is sent.
Possible values: Enable or Disable (default)
04 Output of CLASS /
ANI and DNIS
Enable to include Caller ID/ANI numbers in SMDR records.
Possible values: Enable or Disable (default)
05 Calling Number
Digits Sent to VM
Select how many calling number digits to send to the VM unit.
Possible values: 2~10 digits (default = 10)
Note If 04 Output of CLASS / ANI and DNIS is enabled, this value must be 10.
06 Blank Digits Sent to
VM
Send SMDI-Bellcore Standard VM Interface.
Possible values: 1 or 2 (default).
• 1 = 1985 (single space)
• 2 = 1991 (two spaces).
07 Auto Cancel of VM
and MW
1
Setting of auto cancel of VM and MW.
Possible values: Enable (default) or Disable
08 DTMF Duration Select VM ID Code and System DTMF Signal Time.
Possible values: 80 ms (default) or 160 ms
09 LCD Control of Voice
Mail
Enables Toshiba Proprietary Integration (TPI) for Soft Key Control of VM. TPI and
Soft Key Control of Voice Mail requires Stratagy Enterprise Server Release 3.x or
higher.
Possible values: Enable (default) or Disable
10 Central VM Callback Enter the pilot DN for the centralized voice mail system. If this field is left blank,
the previously stored number will be deleted.
Possible values: Up to 7 ASCII characters (default = no value)
To Next Page
Loading...
