Toshiba CTX100-S - Page 232

Services
LCR/DR
9-26 Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
525 LCR Route Definition Assignment
Prerequisite Program: 520 page 9-23
This command assigns Route Definitions for LCR. A Route Definition consists of an OLG and a Digit
Modification index.
526 Modified Digits Table Assignment
Prerequisite Program: 521 page 9-24
This command modifies LCR dialed numbers by deleting digits from and adding digits to the dialed
numbers.
FIELD DESCRIPTION
00 Route Definition Select the Route Definition number.
Possible values: 1~128 (default = no value)
01 OLG Number Select the OLG Number associated with this Route Definition.
Possible values: 1~128 (default = 1)
02 Digit Modification Index Select the Digit Modification number associated with this Route Definition.
Possible values: 1~128 (default = 1)
FIELD DESCRIPTION
00 Digit Modification Index Select the Digit Modification Index used by the LCR Route Choice table to
determine the digit modification treatment to be applied. Leading digits of a
dialed number may be deleted; leading and trailing digits may be added to the
dialed number.
Possible values: 1~128 (default = no value)
01 Delete Digits Select the quantity of digits to be deleted from the beginning of dialed number.
Possible values: 0~10 (default = 0)
02 Add Leading Digits Enter the digit string to be inserted at the beginning of the number.
Possible values: Up to 23 ASCII characters (default = no value)
03 Add Trailing Digits Enter the digit string to be inserted at the end of the number.
Possible values: Up to 23 ASCII characters (default = no value)