System
102 Flexible Access Codes
4-6 Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
Activate System Call Forward 670
Cancel System Call Forward 671
Call Pickup -Directed DN Pickup of Ringing or Held DN calls and Call
Park Answer
678
Call Pickup for Incoming Call -Group Pickup
Call Pickup for Incoming Call -Directed Terminal 681
Call Pickup for Incoming Call -Directed Group 682
Call Pickup for Incoming Call -Directed DN 683
Call Pickup for Incoming Call -Any External Call 684
Call Pickup for On-Hold Call -Directed CO Retrieve 685
Call Pickup for On-Hold Call -Local Retrieve 686
Call Pickup for On-Hold Call -Remote Retrieve 687
Call Pickup for On-Hold Call -Directed DN Retrieve 688
Call Pickup
1
- Directed DN pickup for either Ringing or Held Calls (Release
2.0, MF017 or higher)
679
Transfer to Voice Mail 690
Repeat Last Number Dialed 700
Volume Control for BEEP 710
Change LCD Display Language 720
Advisory Message - Activation 730
Advisory Message - Cancellation 731
Emergency Call 740
Attendant Console Group Access Code 750
Operator Call Special Dial (for Tenant Service)
751
Private Network Access Code
760
Node ID (Coordinated Directory Number Prefix) 770
1RQH
Substitution of Dial * 780
Substitution of Dial # 781
Originate Call with Sub Address -Outgoing Call/Internal Call 782
Application starting access code 800
Split (Conference) 860
System Date Adjust Code (Release 1.02, MA227 or higher) 910
System Time Adjust Code (Release 1.02, MA227 or higher) 911
1. Feature key is not provided for this Call Pickup. If you want a feature key, please use Single Touch Button that has
a feature access code for this call pickup.
Table 4-1 Flexible Numbering Plan Default Settings (continued)
Flexible Numbering Feature
Feature
Index
Default
Access Code
Programmed
Value
To Next Page
Loading...
