© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
REVISION RECORD
11
Ver.03
Ver.03 <2008.09.30>
Page Contents
2-2 207 has been deleted.
300 has been added.
2-3 207 has been deleted.
2-17 207 has been deleted.
"All CSV files" has been added.
2-27 8240 has been added.
2-42 The contents of 1070,1071 and 1072 have been corrected.
2-50 The content of 7475 has been corrected.
The content of 7478 has been corrected.
2-61 8240 has been added.
2-74 The code name of 2692 and 2693 has been corrected.
2-81 The code name of 8508, 8509 and 8510 has been corrected.
2-82 Procedure 5 has been deleted.
2-113 The code names of 8508, 8509 and 8510 have been corrected.
3-2 Fig.3-1 has been changed.
3-9 "2. Printer related adjustment" has been corrected to "2. Printer-related image dimensional
adjustment".
"3. Scanner related adjustment" has been corrected to "2. Scanner-related image dimen-
sional adjustment".
3-15 "Single-sided grid pattern in CK Mode" has been corrected to "Single-sided grid pattern in
K(4) Mode" and the description of K (4) system has been added.
3-23 "10 mm" has been corrected to "5 mm".
"10
±0.5 mm" has been corrected to "5±0.5 mm".
3-25 "[F] Top margin"
"Printer" has been deleted.
3-26 "[G] Right margin"
"Printer" has been deleted.
3-27 "[H] Bottom margin"
"Printer" has been deleted.
3-28
"10
±0.5 mm" has been corrected to "5±0.5 mm".
3-31 The codes in the list have been corrected.
3-36 "Remarks" in "3.2.5 Background adjustment" has been corrected.
3-38 "3.2.9 Setting range correction (Adjustment of background peak)" has been deleted.
3-48 "[Fax]" has been corrected to "[FAX]".
3-49 "3.3.3 Color balance adjustment (Color Mode)" has been corrected to "3.3.3 Color balance
adjustment".
"[Fax]" has been corrected to "[FAX]".
3-54 "3.3.15 Thin line width lower limit adjustment" has been added.
3-57 "Remarks" in "3.4.3 Background adjustment (Color Mode)" has been corrected.
3-60 "3.4.7 Setting range correction (Adjustment of background peak)" has been deleted.
3-64 "Notes" has been added to "3.5.2 Beam level conversion setting".
4-1 4.1.2 Precautions
"Program file name" has been corrected.
The capacity of USB memory has been corrected.
4-12 Fig.4-13 has been corrected.
4-14 "[C] Print out "function list" has been corrected to "[C] Print out "FUNCTION" list".
Step (4) has been corrected.
4-16 "[H] Reset "function list" has been corrected to "[H] Reset "FUNCTION" list".
To Next Page
Loading...
Need help?
General
