e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
REVISION RECORD
12
5-13 The description for "C3:Separation roller" has been changed.
"C6:Drive gear" has been changed to "C7:Drive gear".
The description for "C7:Drive gear" has been changed.
5-15 The description for "E3:Separation roller" has been changed.
5-21 "H4:Front shield (unified with the doctor blade)" has been added.
5-37 "5.8 Maintenance Part List"
The parts list of Harness jig has been corrected.
5-38 The illustration for "5.8 Maintenance Part List" has been changed.
6-89 <Color toner low density> has been added.
6-97 <Color toner low density> has been added.
6-103 <Color toner low density> has been added.
7-4 "7.1.5 SYS board"
Step (6) has been corrected.
7-5 "7.1.7 LGC board"
Fig.7-12 has been corrected.
7-18 Fig.7-37 has been corrected.
7-20 "[C] Print out "function list" has been corrected to "[C] Print out "FUNCTION" list".
7-21 "[H] Reset "function list" has been corrected to "[H] Reset "FUNCTION" list".
7-22 The content of "[D] Reinstall options" has been corrected.
7-24 Fig.7-39 has been corrected.
7-27 "GA-1010" has been corrected to "GS-1010”.
"GA-1020" has been corrected to "GS-1020”.
8-11 "[C] Adjustment" has been added.
8-24 "[C] Adjustment" has been added.
Ver.03 <2008.09.30>
Page Contents
To Next Page
Loading...
Need help?
General
