2.HOW TO MAKE COPIES
Placing Originals 23
2 HOW TO MAKE COPIES
Placing originals on the original glass
The original glass can be used for originals such as OHP films or tracing paper, as well as plain paper, that cannot be
placed on the RADF (optional).
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the Original Cover (optional) or the RADF (optional).
Raise it 60 degrees or more so that the size of the original can be detected correctly.
3
Lower the Original Cover (optional) or the RADF (optional) carefully.
2
Place the original with its face down on the original
glass and align it against the left rear corner of the
glass.
When you copy highly transparent originals
When you copy highly transparent originals such as OHP films or
tracing paper, place a blank sheet, which is the same size as the
original or larger, over the original.
To Next Page
Loading...
Need help?
General
