Toshiba e-STUDIO2830C Copying Guide

2.HOW TO MAKE COPIES
Making Copies 35
2 HOW TO MAKE COPIES
 Selecting exit tray
You can select the exit tray if an optional finisher or the Inner Tray is installed.
y The available exit tray may be restricted depending on copy modes and paper sizes.
y Exit tray selection is set at automatic selection by default.
Changing the exit tray
The exit tray currently selected is displayed on the equipment status indication area. To change the exit tray, press [EXIT
TRAY]. Every time you press this, the display changes from the exit tray of the equipment, each exit tray of the finisher and
Inner Tray, and automatic selection in this order.
Current exit tray
Exit tray auto-selection
indication
[
EXIT TRAY
]
button

Toshiba e-STUDIO2830C Specifications

General

Brand	Toshiba
Model	e-STUDIO2830C
Category	All in One Printer
Language	English